Sewage Pumps

CFW Series         80WQ-4P Series      80WQ-2P Series      100WQ Series

50WQ Sewage Pumps Series

Application:

These heavy-duty sewage pumps are self-contained and recommended for use in a sump or basin, application: sewage, high-capacity sump, effluent.

 

Key Features:

  • 1/2HP, 3/4HP and 1HP
  • Class 30 cast iron construction
  • 2”NPT discharge, Vertical
  • Dual mechanical, 300 series Stainless Steel Parts
  • Oil-filled motor with automatic reset overload provides safe operation
  • Ball bearing construction for long life

 

 

Technical Data:

  • DISCHARGE -  2" NPT. Vertical
  • SOLIDS HANDLING 1.5" (38mm)
  • LIQUID TEMPERATURE 104 Degrees F. Contiuous, 140 Degrees F. Intermittent
  • MOTOR HOUSING Cast Iron
  • VOLUTE Cast Iron
  • SEAL PLATE Cast Iron
  • IMPELLER Cast Iron, vortex design, dynamically balanced for mechanical protection      
  • SHAFT  Corrosion resistance stainless steel, threaded design.
  • BEARING (UPPER & LOWER) Single Row, Ball, Oil Lubricated
  • HARDWARE 300 Series Stainless Steel
  • SQUARE RINGS Buna-N
  • POWER CORD 20ft quick disconnect cord w/plug on 120 volt, pressure grommet for sealing and strain relief. U/L and CSA listed 14AWG Type SJTOW
  • DUAL MECHANICAL SEALS: 
    Stainless steel metal parts, BUNA-N elastomers
    Upper Seal: Carbon vs Ceramic
    Lower Seal: Silicon Carbide vs Silicon Carbide
  • MOTOR (SINGLE PHASE) 
    3450 RPM, 60Hz, 115 Volts, 2 Pole
    NEMA L Includes Overload Protection In The Motor.
    Oil Filled, Class B
    Permanent Split Capacitor 
  • SIZE 10" X 7.2" X 17"

Performance:

Model Hp Volt.
Ph
FLA
amps
Gal/Min @ Total Head in Feet Shut
off
Weight
(lbs)
0 5 10 15 20 25
50WQ0.37-2P 1/2 115/1 10.0 105 88 76 60 35   23 57
50WQ0.55-2P 3/4 115/1 12.0 120 98 80 68 35   27 58
50WQ0.75-2P 1 115/1 15.0 140 125 110 80 57 6 33 59

 

Download the 50WQ Sewage pumps brochure here