Effluent Pumps

CFS Pumps   

CFE40 Effluent Pumps Series

Application:

This high-performance sump/effluent pump is goods for Effluent and Wastewater removal, Sump Drainage, Water Transfer, ect.

 

Key Features:

  • 4/10 HP
  • Class 30 cast iron construction
  • 1-1/2”NPT discharge, Vertical
  • Single mechanical, Silicon Carbide, 300 series Stainless Steel Parts
  • Oil-filled motor with automatic reset overload provides safe operation
  • Ball bearing construction for long life
  • Automatic float switch (Optional, Model "A")

 

Technical Data:

  • DISCHARGE - 1-1/ 2" NPT. Vertical
  • SOLIDS HANDLING 3/8" (10mm)
  • LIQUID TEMPERATURE 104 Degrees F. Contiuous
  • MOTOR HOUSING Cast Iron
  • VOLUTE Cast Iron
  • SEAL PLATE Cast Iron
  • IMPELLER Cast Iron, 10 Vane, Vortex           
  • SHAFT Stainless Steel
  • BEARING (UPPER & LOWER) Single Row, Ball, Oil Lubricated
  • HARDWARE 300 Series Stainless Steel
  • SQUARE RINGS Buna-N
  • POWER CORD 20ft quick disconnect cord w/plug on 120 volt, pressure grommet for sealing and strain relief. U/L and CSA listed 14AWG Type SJTOW
  • MOTOR (SINGLE PHASE) 
    3450 RPM, 60Hz, 115 Volts
    NEMA L Includes Overload Protection In The Motor.
    Oil Filled, Class B
    Permanent Split Capacitor 
  • SIZE 9" X 7 " X 13 "

Performance:

Model Hp Volt.
Ph
FLA
amps
Gal/Min @ Total Head in Feet Shut
off
Weight
(lbs)
0 5 10 15 20 25
CFE40A 4/10 115/1 8 43 40 38 30 23 10 46 28
CFE40M 4/10 115/1 8 43 40 38 30 23 10 46 27